RCF TTS-18-A-II 2800W Active High Power Subwoofer – 18 Online now
Description
RCF TTS 18-A IIÂ Overview
The black RCF TTS 18-A II is an 18 2800W active subwoofer designed to provide low-frequency reinforcement for A V system installers, audio engineers, and DJs in outdoor environments or houses of worship, concert venues, and live stage applications. Its Class-D amplifier delivers 2800W of power to the 18 woofer, which produces a frequency response of 30 to 400 Hz and is hyper-vented for heat dissipation.
32-bit DSP processing yields simple adjustment of input gain, delay, and crossover presets. RDNet control via EtherCon I O allows comprehensive remote parameter control and system monitoring. XLR and powerCON inputs and outputs are employed for straightforward integration with standard PA components.
The TTS 18-A II boasts a sturdy wood cabinet, built-in carry handles, and M20 pole sockets for tour readiness.
Low-Noise Electronics
The switch-mode power supply Class-D amplifier integrates a low-noise, 32-bit DSP circuit, controlled through the RCF RDNet network to handle the clipping limiters, RMS limits, polarity, amplitude, timing, and equalization. All settings, monitoring, and advanced features are available inside the integrated RDNet Networked Management software. The rear-panel encoder adjusts volume, delay, and presets.
Sturdy Cabinet
The cabinet is made of high-quality birch plywood with weatherproof treatments. The sub is stackable and lightweight for easy setup and tear down. The polyurea coating and rugged structure of the cabinet survive long-term use and transportation while the separate housing for the amplifier guarantees component efficiency and reliability. A pole receptacle on top and side allows the woofer to be deployed in various situations.
Hyper-Vented Woofer
The 18 woofer features a lightweight neodymium magnet, inside-outside copper voice coil, and silicon double spiders. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed an internal ventilation system with low power compression. The Hyper Ventilation System is the result of a complex combination of ventilation ducts in the voice coil former, in the magnetic structure, and in the woofer s basket. Demodulation rings reduce the harmonic and intermodulation distortion due to voice coil displacement, and as input current varies, the system inductances are more linear. The cone is water-resistant.
Vented Ports
The airflow in the vented ports suffers the turbulence of the air due to the speed of air. The improved vented port is a proprietary solution that enhances aerodynamic behavior of the air, thereby gaining efficiency and reducing distortion.
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
The black RCF TTS 18-A II is an 18 2800W active subwoofer designed to provide low-frequency reinforcement for A V system installers, audio engineers, and DJs in outdoor environments or houses of worship, concert venues, and live stage applications. Its Class-D amplifier delivers 2800W of power to the 18 woofer, which produces a frequency response of 30 to 400 Hz and is hyper-vented for heat dissipation.
32-bit DSP processing yields simple adjustment of input gain, delay, and crossover presets. RDNet control via EtherCon I O allows comprehensive remote parameter control and system monitoring. XLR and powerCON inputs and outputs are employed for straightforward integration with standard PA components.
The TTS 18-A II boasts a sturdy wood cabinet, built-in carry handles, and M20 pole sockets for tour readiness.
Low-Noise Electronics
The switch-mode power supply Class-D amplifier integrates a low-noise, 32-bit DSP circuit, controlled through the RCF RDNet network to handle the clipping limiters, RMS limits, polarity, amplitude, timing, and equalization. All settings, monitoring, and advanced features are available inside the integrated RDNet Networked Management software. The rear-panel encoder adjusts volume, delay, and presets.
Sturdy Cabinet
The cabinet is made of high-quality birch plywood with weatherproof treatments. The sub is stackable and lightweight for easy setup and tear down. The polyurea coating and rugged structure of the cabinet survive long-term use and transportation while the separate housing for the amplifier guarantees component efficiency and reliability. A pole receptacle on top and side allows the woofer to be deployed in various situations.
Hyper-Vented Woofer
The 18 woofer features a lightweight neodymium magnet, inside-outside copper voice coil, and silicon double spiders. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed an internal ventilation system with low power compression. The Hyper Ventilation System is the result of a complex combination of ventilation ducts in the voice coil former, in the magnetic structure, and in the woofer s basket. Demodulation rings reduce the harmonic and intermodulation distortion due to voice coil displacement, and as input current varies, the system inductances are more linear. The cone is water-resistant.
Vented Ports
The airflow in the vented ports suffers the turbulence of the air due to the speed of air. The improved vented port is a proprietary solution that enhances aerodynamic behavior of the air, thereby gaining efficiency and reducing distortion.
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
Sturdy Cabinet
The cabinet is made of high-quality birch plywood with weatherproof treatments. The sub is stackable and lightweight for easy setup and tear down. The polyurea coating and rugged structure of the cabinet survive long-term use and transportation while the separate housing for the amplifier guarantees component efficiency and reliability. A pole receptacle on top and side allows the woofer to be deployed in various situations.
Hyper-Vented Woofer
The 18 woofer features a lightweight neodymium magnet, inside-outside copper voice coil, and silicon double spiders. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed an internal ventilation system with low power compression. The Hyper Ventilation System is the result of a complex combination of ventilation ducts in the voice coil former, in the magnetic structure, and in the woofer s basket. Demodulation rings reduce the harmonic and intermodulation distortion due to voice coil displacement, and as input current varies, the system inductances are more linear. The cone is water-resistant.
Vented Ports
The airflow in the vented ports suffers the turbulence of the air due to the speed of air. The improved vented port is a proprietary solution that enhances aerodynamic behavior of the air, thereby gaining efficiency and reducing distortion.
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
Hyper-Vented Woofer
The 18 woofer features a lightweight neodymium magnet, inside-outside copper voice coil, and silicon double spiders. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed an internal ventilation system with low power compression. The Hyper Ventilation System is the result of a complex combination of ventilation ducts in the voice coil former, in the magnetic structure, and in the woofer s basket. Demodulation rings reduce the harmonic and intermodulation distortion due to voice coil displacement, and as input current varies, the system inductances are more linear. The cone is water-resistant.
Vented Ports
The airflow in the vented ports suffers the turbulence of the air due to the speed of air. The improved vented port is a proprietary solution that enhances aerodynamic behavior of the air, thereby gaining efficiency and reducing distortion.
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
Vented Ports
The airflow in the vented ports suffers the turbulence of the air due to the speed of air. The improved vented port is a proprietary solution that enhances aerodynamic behavior of the air, thereby gaining efficiency and reducing distortion.
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
RDNet Control
RDNet is a proprietary protocol that provides straightforward monitoring and intuitive control of the audio system down to every device and object. Each device has its own DSP, giving the possibility to address presets or parameters specific to single or groups of objects. A network user can change level, delay, EQ, and advanced subwoofer configurations.
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
RCF TTS 18-A IIÂ Specs
PA Speaker
Configuration
Active Subwoofer
Total Power Capacity
2800 W Peak
1400 W RMS
Amplifier Class
Class-D
Drivers
LF Driver
1 x 18 457.2 mm Woofer
LF Voice Coil
4 101.6Â mm
Performance
Frequency Response
30 Hz to 400 Hz
Maximum SPL
137 dB
Input Sensitivity
+4 dBu
Protections
RMS, Thermal
Connectivity
Audio I O
1 x XLR 3-Pin Input
1 x XLR 3-Pin Output
Network I O
1 x etherCON (RDNet) Input
1 x etherCON (RDNet) Output
Signal Processing
Dynamic Processing
Fast Limiter
Power
AC Power Connector
1 x powerCON Input
1 x powerCON Output
Physical
Mounting
2 x M20 (Top)
Cooling
Forced Convection
Construction Material
Metal Grille, Plywood
Dimensions
27.9 x 21.3 x 28.8 708 x 540 x 732Â mm
Weight
125.6Â lb 57Â kg
| Configuration | Active Subwoofer | ||
| Total Power Capacity | 2800 W Peak 1400 W RMS | ||
| Amplifier Class | Class-D | ||
| LF Driver | 1 x 18 457.2 mm Woofer | ||
| LF Voice Coil | 4 101.6Â mm | ||
| Frequency Response | 30 Hz to 400 Hz | ||
| Maximum SPL | 137 dB | ||
| Input Sensitivity | +4 dBu | ||
| Protections | RMS, Thermal | ||
| Audio I O | 1 x XLR 3-Pin Input 1 x XLR 3-Pin Output | ||
| Network I O | 1 x etherCON (RDNet) Input 1 x etherCON (RDNet) Output | ||
| Dynamic Processing | Fast Limiter | ||
| AC Power Connector | 1 x powerCON Input 1 x powerCON Output | ||
| Mounting | 2 x M20 (Top) | ||
| Cooling | Forced Convection | ||
| Construction Material | Metal Grille, Plywood | ||
| Dimensions | 27.9 x 21.3 x 28.8 708 x 540 x 732Â mm | ||
| Weight | 125.6Â lb 57Â kg | ||